Learn the principles of making, assembling and setting up your instrument, a violin, viola or cello, or complete one of these instruments already in progress. During the course you should increase your knowledge and extend your skills in the making of musical instruments by traditional methods. The outcome is guided by individual projects and goals.
Teaching is generally on a one-to-one basis catering for individual needs and dictated by previous experience, knowledge and ability. There are group demonstrations where appropriate. As the course takes place in a large workshop, adjacent to the other courses in this series, interaction with fellow students and other tutors also plays a valuable role in the learning process.
To complete an instrument in this area may take several courses, depending on the instrument selected and your woodworking experience.
West Dean College has run musical instrument making courses for more than 40 years. This nine-day and supplementary five-day courses run in the Short Course Programme for amateur makers. It can provide an insight to those considering applying for full-time study on the College’s Foundation Degree Arts – Musical Instruments.
Residential students to arrive from 4pm, non-residential to arrive by 6.45pm
6.45pm Welcome followed by dinner (included)
8.00-9.00pm First teaching session, attendance is essential
9.15-5.00pm Classes (lunch included)
From 6.30pm Dinner (included)
Evening working – Students may have access to workshops until 9pm, but only with their tutor’s permission and provided any health and safety guidelines are observed.
9.15am-12.30pm Classes (lunch included). Workshops must be cleared by 3.30pm.
Residential students to vacate rooms by10am.
As soon as you receive confirmation of your place, please tell us which instrument you wish to work on by emailing firstname.lastname@example.org
If you are new to the course, give details of your past experience in instrument making and woodworking. We will pass this information to the tutor who will contact you to discuss this and materials required. Alternatively if you are bringing a part-made instrument, bring materials and information relating to this or inform the tutor of what you need.
If you play a musical instrument please bring it with you for informal music making in the evenings
This is not a definitive list so you should bring as many tools as you think you will need. Some woodworking tools are provided by the College including a variety of planes, gouges, mallets, face sander, lathes, drills etc. however numbers are limited, so you should ideally bring your own if you have them. Diamond sharpening ‘stones’ are also available for use throughout the course. Certain specialised tools may be borrowed from tutors, together with all necessary jigs, moulds and patterns.
Rabone Chesterman 300mm steel rule
* ½ round file or rasp, (Swiss hand cut recommended)
Flat file or rasp
Small engineers set square 3”
(60 ½) small low angle block plane, (Rider, Veritas or Lie Nielsen)
* Scalpel knife and blades, Swan Morton no 15 blade, or violin makers knife
Flat needle file
1/2 round needle file
Chisels, 3/8 & 5/8
Cabinet scrapers – assorted sizes and shapes
Gentlemen's back saw
Strong clothes pegs (20–30)
*Pencils, B and HB
Tool bag or box
A selection of gouges, best purchased after discussion at your first course.
A piece of carpet or cloth to protect work
Cork tile to line clamping blocks/protect work from clamps
Please remember that all personal tools should be clearly marked with your name.
* The College Shop may have a few of these items, but please don't rely on it. If you have queries on which tools you need, ask the tutor.
Please remember to bring clothing which is safe and suitable for the workshop, it is also essential that you wear stout covered footwear (not sandals).
Available from tutor:
On this course the tutor can obtain most of the materials for those beginning an instrument. This charge should be paid to him before the end of the course, by cash or cheque, in addition to any materials that students may have purchased individually.
Violin # £120–200
Viola # £120–200
Cello # £400–700
The approximate timber costs listed are to give a guide only and final costs will depend on individual choice of timber and other variables. Costs of strings, pegs, reeds and other accessories are not included. Please discuss this when the tutor contacts you about your requirements.
Students should be aware that it is not possible to complete instruments marked # in one nine-day course.
Humidity levels in the workshop are variable to dry; whilst the College has addressed this, some factors are beyond our control, therefore instruments are brought and left in the workshop at your own risk.
Each tutor will take a half-day break, in rotation with the other tutors, to be decided during the week. They will discuss suitable work for that session with you if you wish to continue working.
Colin Cross has over thirty years’ experience as a violin maker. He trained at Newark under Wilfred Saunders and Patrick Jowett. In recent years, he has been head of workshop at Stringer’s in London and run his own violin-making business in Kent. He has made and sold over 150 instruments.